Sale!

ECSE 202 – Assignment 4 solved

Original price was: $35.00.Current price is: $35.00. $17.50

Category: You will receive a download link of the .ZIP file upon Payment

Description

5/5 - (1 vote)

Background
The simulation in Assignment 3 has no user interface, it simply runs according to a set of hardwired parameters. In this assignment you will add a simple user interface as depicted below in
Figure 1.
Figure 1
As can be seen in the figure, the simulation incorporates a JPanel that includes a means of
entering simulation parameters. Here sliders are being used in conjunction with IntFields and
DoubleFields (similar to the Temperaure Conversion example in the notes). When the user
moves a slider, the corresponding value is echoed in the corresponding Int/Double field.
Similarly, when the user enters a number in the Int/Double field, the slider moves to a
corresponding position. Across the top a set of 4 JComboBoxes are implemented to minic a
familiar user interface, but only the first is actually used by the program. These allow the the
user to select different features of the program (more below in Requirements). Finally, there is a
single JToggleButton at the bottom. As its label implies, if pushed, the trace of each ball is
plotted on the screen in the same color as the ball. Together these features allow considerable
flexibility over the program in Assignment 3.
Requirements
1. Functionality
Your program must allow the user to perform the following functions. How you implement the
User Interface is entirely up to you (e.g. JComboBox, push-buttons, etc.). In other words, you do
not have to replicate the example in Figure 1.
Run: Starts a new simulation with parameters chosen from the current parameter set.
You should be able to run multiple simulations with new balls added to the display
at each Run instance.
Stack: Stacks all the balls created to date. For example, assume that you have run a simulation
and stacked the balls. Now you run another simulation and stack again. This time all the
balls in the previous stack are included in the current one. As long as you have not
created a new bTree, all balls will be included when stacked.
Clear: Clears the current display and kills the simulation attached to each ball. If the simulation
is run again with new balls created, balls created previously are effectively eliminated.
Stop: Stops the current simulation, freezing the current display.
Quit: Exits the program.
In addition, your program must include a Trace mode that can be enabled or disabled. When
enabled, the output resembles the output of Assignment 1 where a marker is placed at location
traversed by the ball. In this implementation the color of the “dot” should match the color of the
ball it represents. The display should be set up using with control functions laid across the top
row, parameters along the right side of the display, and the Trace mode button at the bottom of
the display. This is most easily accomplished using the BorderLayout manager. However you
choose to implement selection, it must be event-driven so that the program reacts accordingly.
2. Parameter Entry
The key requirements are that i) all the parameters inputs should appear within a single JPanel
that gets added to the display as shown, and ii) the user must be able to enter numerical
parameters using the keyboard. The example in Figure 1 is quite complex to implement as the
program must respond to multiple event types. The point here is to demonstrate what is possible.
You can do this quite simply using Int/Double field boxes that generate ActionEvents (see the
Temperature Conversion example in the notes). By the way, you can also do this within
GraphicsProgram, but a workaround is needed for it to work correctly (see below).
Implementation
Most of the work in this assignment is related to modifying bSim to incorporate user interface
elements as well as re-packaging the simulation code and stacking code as methods that can be
called from the user interface. In particular, you should create a doSim() method that generates a
set of balls, attaches them to the screen, and waits for the simulation to complete. Rather than
immediately proceeding to ball stacking on completion, doSim() should return. Stacking
functionality should be packaged as a method, doStack(), which traverses myTree and generates
the appropriate display. Unfortunately, if you try to call doSim() on an event, it will run, but not
update the display. This has to do with how GraphicsProgram is implemented and is beyond the
scope of this course. If you’re experienced writing Java code, then you can (if you haven’t
already in Assignment 3) use a different framework outside of acm. Otherwise, a workaround is
shown below:
The usual way of handling a user selection would look something like the following:
1. Restructure bSim so that the simulation component (generate the set of bBalls) is set up
as a method that can be called more than once, e.g., doSim();
2. Set up an entry for doSim() in a JComboBox or push button.
3. Dispatch to doSim() when the corresponding entry is selected as shown below:
public void itemStateChanged(ItemEvent e) {
JComboBox source = (JComboBox)e.getSource();
if (source==bSimC) { \
if (bSimC.getSelectedIndex()==1) {
System.out.println(“Starting simulation”);
doSim();
}
else if (bSimC.getSelectedIndex()==2) {
System.out.println(“Histogramming balls”);
doHist();
}
etc…
}
}
Unfortunately, do to the way in which acm is implemented, your simulation will run, but not
update the screen. An inelegant solution to this problem is as follows:
public void init() {
simEnable=false; // this is an instance variable
…other code…
while(true) {
pause(200);
if (simEnable) { // Run once, then stop
doSim();
bSimC.setSelectedIndex(0);
simEnable=false;
}
}
}
The idea is to run the simulation from within the init() method rather than call it from
itemStateChanged(). Variable simEnable allows the simulation to run exactly once if
simEnable=true.
Back at itemStateChanged(), instead of calling doSim(), we simply change this to
simEnable=true. This method is referred to as polling – you will encounter it again in ECSE
211, Design Principles and Methods.
Instructions
Modify the bSim class to implement the specified user interface. Take note that the display area
shown in Figure 1 must match the display area in Assignment 3. In other words, you need to add
additional space to incorporate the parameter panel. In A3 WIDTH corresponded to the entire
display. Now it corresponds to the width of the display less the width of the parameter panel.
You might also need to modify aBall to incorporate the trace feature.
To Hand In
1. The source java files. Note – use the default package. Make sure that the random
number generator is seeded with long integer value = 424242; this will ensure that your
output matches ours if your simulations are correct.
2. Run a simulation with a single ball, starting at the center of the display field, with ball
size = 1.0, loss = 0.40, velocity = 40.0, angle = 85.0 (you do this by making the min and
max parameters equal to the specified value). Enable trace. This should replicate the
output of Assignment 3, Part 1 as shown below. Take a screenshot of the display and
hand it in as a pdf file named A4-1.pdf.
3. Without altering the display from Part (2), change the angle parameter from 85° to 95°
and run the simulation again. Take a screenshot of the display and save as a pdf file
named A4-2.pdf. It should produce the output shown below.
4. Without leaving the program, enter a clear command to remove the current bTree and
erase the display (same conditions as when the program is started from scratch. Run a
simulation with the exact parameters as the last run from Assignment 3. On completion,
take a screenshot of the display and save as a pdf file named A4-3.pdf. It should produce
the output shown below.

5. Finally, with the display as shown above, issue a stack command. Take a screenshot of
the display and save as a pdf file named A4-4.pdf. It should produce the output shown
below.
Notes:
Since this is the last Java assignment, we will pay particular attention to the documentation of
your code. We know that assignments from previous years are floating around on the Web, and
naturally we will run comparisons of your code against them. The point of these assignments is
for you to develop the requisite skills that will carry you through the rest of the program.
About Coding Assignments
We encourage students to work together and exchange ideas. However, when it comes to finally
sitting down to write your code, this must be done independently. Detecting software plagiarism
is pretty much automated these days with systems such as MOSS, especially when the
assignment is a variation from the previous semester.
https://www.quora.com/How-does-MOSS-Measure-Of-Software-Similarity-Stanford-detectplagiarism
Please make sure your work is your own. If you are having trouble, the Faculty provides a free
tutoring service to help you along. You can also contact the course instructor or the tutor during
office hours. There are also numerous online resources – Google is your friend. The point isn’t
simply to get the assignment out of the way, but to actually learn something in doing.
fpf October 27, 2019