Description
In this lab we will use the high level I/O capabilities of the DE1-SoC simulator to
- display pixels and characters using the VGA controller, and
- accept keyboard input via the PS/2 port.
For each of these topics, we will create a driver. We will test the drivers both individually and in tandem by means of test applications.
1. Drawing things with VGA
The DE1-SoC computer has a built-in VGA controller that can render pixels, characters or a combination of both. The authoritative resource on these matters is Sections 4.2.1 and 4.2.4 of the DE1-SoC Computer Manual. This section of the lab provides a quick overview that should suffice for the purpose of completing this lab.
To render pixels, the VGA controller continuously reads the pixel buffer, a region in memory starting at 0xc8000000
that contains the color value of every pixel on the screen. Colors are encoded as 16-bit integers that reserve 5 bits for the red channel, 6 bits for the green channel and 5 bits for the blue channel. That is, every 16-bit color is encoded like so:
15 … 11 | 10 … 5 | 4 … 0 |
---|---|---|
Red | Green | Blue |
The pixel buffer is 320 pixels wide and 240 pixels high. Individual pixel colors can be accessed at 0xc8000000 | (y << 10) | (x << 1)
, where x
and y
are valid x and y coordinates.
As previously hinted, we can also render characters. To do so, we will use the character buffer, which is analogous to the pixel buffer, but for characters. The device’s VGA controller continuously reads the character buffer and renders its contents as characters in a built-in font. The character buffer itself is a buffer of byte-sized ASCII characters at 0xc9000000
. The buffer’s has a width of 80 characters and a height of 60 characters. An individual character can be accessed at 0xc9000000 | (y << 7) | x
.
Task: Create a VGA driver
To provide a slightly higher-level layer over the primitive functionality offered by the pixel and character buffers, we will create a driver. That is, a set of functions that can be used to control the screen.
To help get you started, we created an application that uses such functions to draw a testing screen. Your job is to create a set of driver functions to support the application. Download vga.s
and augment it with the following four functions:
VGA_draw_point_ASM
draws a point on the screen with the color as indicated in the third argument, by accessing only the pixel buffer memory. Hint: This subroutine should only access the pixel buffer memory.VGA_clear_pixelbuff_ASM
clears (sets to 0) all the valid memory locations in the pixel buffer. It takes no arguments and returns nothing. Hint: You can implement this function by callingVGA_draw_point_ASM
with a color value of zero for every valid location on the screen.VGA_write_char_ASM
writes the ASCII code passed in the third argument (r2) to the screen at the (x, y) coordinates given in the first two arguments (r0 and r1). Essentially, the subroutine will store the value of the third argument at the address calculated with the first two arguments. The subroutine should check that the coordinates supplied are valid, i.e., x in [0, 79] and y in [0, 59]. Hint: This subroutine should only access the character buffer memory.VGA_clear_charbuff_ASM
clears (sets to 0) all the valid memory locations in the character buffer. It takes no arguments and returns nothing. Hint: You can implement this function by callingVGA_write_char_ASM
with a character value of zero for every valid location on the screen.
Their C signatures are as follows:
void VGA_draw_point_ASM(int x, int y, short c);
void VGA_clear_pixelbuff_ASM();
void VGA_write_char_ASM(int x, int y, char c);
void VGA_clear_charbuff_ASM();
Notes:
- Use suffixes
B
andH
with the assembly memory access instructions in order to read/modify the bytes/half-words of the memory contents. - You must follow the conventions taught in class. If you do not, then the testing code in the next section will be unlikely to work.
Testing the VGA driver
To test your VGA driver, run your finished assembly file. You can inspect the VGA output visually using the VGA pixel buffer tab under the Devices panel of the simulator.
If you implemented your driver correctly, compiling and running the program will draw the following image.
2. Reading keyboard input
For the purpose of this lab, here’s a high level description of the PS/2 keyboard protocol. For a more comprehensive resource, see Section 4.5 (pp. 45-46) of the DE1-SoC Computer Manual.
The PS/2 bus provides data about keystroke events by sending hexadecimal numbers called scan codes, which for this lab will vary from 1-3 bytes in length. When a key on the PS/2 keyboard is pressed, a unique scan code called the make code is sent, and when the key is released, another scan code called the break code is sent. The scan code set used in this lab is summarized by the table below. (Originally taken from Baruch Zoltan Francisc’s page on PS/2 scan codes.)
KEY | MAKE | BREAK | KEY | MAKE | BREAK | KEY | MAKE | BREAK | ||
A |
1C |
F0,1C |
9 |
46 |
F0,46 |
[ |
54 |
FO,54 |
||
B |
32 |
F0,32 |
\` |
0E |
F0,0E |
INSERT |
E0,70 |
E0,F0,70 |
||
C |
21 |
F0,21 |
- |
4E |
F0,4E |
HOME |
E0,6C |
E0,F0,6C |
||
D |
23 |
F0,23 |
= |
55 |
FO,55 |
PG UP |
E0,7D |
E0,F0,7D |
||
E |
24 |
F0,24 |
\ |
5D |
F0,5D |
DELETE |
E0,71 |
E0,F0,71 |
||
F |
2B |
F0,2B |
BKSP |
66 |
F0,66 |
END |
E0,69 |
E0,F0,69 |
||
G |
34 |
F0,34 |
SPACE |
29 |
F0,29 |
PG DN |
E0,7A |
E0,F0,7A |
||
H |
33 |
F0,33 |
TAB |
0D |
F0,0D |
U ARROW |
E0,75 |
E0,F0,75 |
||
I |
43 |
F0,43 |
CAPS |
58 |
F0,58 |
L ARROW |
E0,6B |
E0,F0,6B |
||
J |
3B |
F0,3B |
L SHFT |
12 |
FO,12 |
D ARROW |
E0,72 |
E0,F0,72 |
||
K |
42 |
F0,42 |
L CTRL |
14 |
FO,14 |
R ARROW |
E0,74 |
E0,F0,74 |
||
L |
4B |
F0,4B |
L GUI |
E0,1F |
E0,F0,1F |
NUM |
77 |
F0,77 |
||
M |
3A |
F0,3A |
L ALT |
11 |
F0,11 |
KP / |
E0,4A |
E0,F0,4A |
||
N |
31 |
F0,31 |
R SHFT |
59 |
F0,59 |
KP * |
7C |
F0,7C |
||
O |
44 |
F0,44 |
R CTRL |
E0,14 |
E0,F0,14 |
KP - |
7B |
F0,7B |
||
P |
4D |
F0,4D |
R GUI |
E0,27 |
E0,F0,27 |
KP + |
79 |
F0,79 |
||
Q |
15 |
F0,15 |
R ALT |
E0,11 |
E0,F0,11 |
KP EN |
E0,5A |
E0,F0,5A |
||
R |
2D |
F0,2D |
APPS |
E0,2F |
E0,F0,2F |
KP . |
71 |
F0,71 |
||
S |
1B |
F0,1B |
ENTER |
5A |
F0,5A |
KP 0 |
70 |
F0,70 |
||
T |
2C |
F0,2C |
ESC |
76 |
F0,76 |
KP 1 |
69 |
F0,69 |
||
U |
3C |
F0,3C |
F1 |
05 |
F0,05 |
KP 2 |
72 |
F0,72 |
||
V |
2A |
F0,2A |
F2 |
06 |
F0,06 |
KP 3 |
7A |
F0,7A |
||
W |
1D |
F0,1D |
F3 |
04 |
F0,04 |
KP 4 |
6B |
F0,6B |
||
X |
22 |
F0,22 |
F4 |
0C |
F0,0C |
KP 5 |
73 |
F0,73 |
||
Y |
35 |
F0,35 |
F5 |
03 |
F0,03 |
KP 6 |
74 |
F0,74 |
||
Z |
1A |
F0,1A |
F6 |
0B |
F0,0B |
KP 7 |
6C |
F0,6C |
||
0 |
45 |
F0,45 |
F7 |
83 |
F0,83 |
KP 8 |
75 |
F0,75 |
||
1 |
16 |
F0,16 |
F8 |
0A |
F0,0A |
KP 9 |
7D |
F0,7D |
||
2 |
1E |
F0,1E |
F9 |
01 |
F0,01 |
] |
5B |
F0,5B |
||
3 |
26 |
F0,26 |
F10 |
09 |
F0,09 |
; |
4C |
F0,4C |
||
4 |
25 |
F0,25 |
F11 |
78 |
F0,78 |
' |
52 |
F0,52 |
||
5 |
2E |
F0,2E |
F12 |
07 |
F0,07 |
, |
41 |
F0,41 |
||
6 |
36 |
F0,36 |
PRNT
|
E0,12,
|
E0,F0,
|
. |
49 |
F0,49 |
||
7 |
3D |
F0,3D |
SCROLL |
7E |
F0,7E |
/ |
4A |
F0,4A |
||
8 |
3E |
F0,3E |
PAUSE |
E1,14,77,
|
Two other parameters involved are the typematic delay and the typematic rate. When a key is pressed, the corresponding make code is sent, and if the key is held down, the same make code is repeatedly sent at a constant rate after an initial delay. The initial delay ensures that briefly pressing a key will not register as more than one keystroke. The make code will stop being sent only if the key is released or another key is pressed. The initial delay between the first and second make code is called the typematic delay, and the rate at which the make code is sent after this is called the typematic rate. The typematic delay can range from 0.25 seconds to 1.00 second and the typematic rate can range from 2.0 cps (characters per second) to 30.0 cps, with default values of 500 ms and 10.9 cps respectively.
Task: Create a PS/2 driver
The DE1-SoC receieves keyboard input from a memory-mapped PS/2 data register at address 0xff200100
. Said register has an RVALID
bit that states whether or not the current contents of the register represent a new value from the keyboard. The RVALID
bit can be accessed by shifting the data register 15 bits to the right and extracting the lowest bit, i.e., RVALID = ((*(volatile int *)0xff200100) >> 15) & 0x1
. When RVALID
is true, the low eight bits of the PS/2 data register correspond to a byte of keyboard data.
The hardware knows when you read a value from the memory-mapped PS/2 data register and will automatically present the next code when you read the data register again.
For more details, see Section 4.5 (pp. 45-46) of the DE1-SoC Computer Manual.
Download ps2.s
. This assembly file implements a program that reads keystrokes from the keyboard and writes the PS/2 codes to the VGA screen using the character buffer. Copy your VGA driver into ps2.s
. Then implement a function that adheres to the following specifications:
- Name:
read_PS2_data_ASM
- Input argument (r0): A memory address in which the data that is read from the PS/2 keyboard will be stored (pointer argument).
- Output argument (r0): Integer that denotes whether the data read is valid or not.
- Description: The subroutine will check the
RVALID
bit in the PS/2 Data register. If it is valid, then the data from the same register should be stored at the address in the pointer argument, and the subroutine should return 1 to denote valid data. If theRVALID
bit is not set, then the subroutine should simply return 0.
read_PS2_data_ASM
’s C declaration is as follows:
int read_PS2_data_ASM(char *data);
Testing the PS/2 driver
To verify that the PS/2 driver is working correctly, you can type into the simulator’s PS/2 keyboard device and verify that the bytes showing up on the screen correspond to the codes you might expect from the table in this section’s introduction.
If you implemented your PS/2 and VGA drivers correctly, then the program will print make and break codes whenever you type in the simulator’s keyboard input device. Make sure to use the keyboard device that says ff200100
.
Note: If you did not manage to implement a working VGA driver, then you can still get credit for the PS/2 driver by replacing
write_byte
with the implementation below. It will write PS/2 codes to memory address 0xfff0
. Delete all calls to VGA driver functions and delete the write_hex_digit
function to ensure that your code still compiles.
write_byte:
push {r3, r4, lr}
ldr r4, =0xfff0
and r3, r3, #0xff
str r3, [r4]
pop {r3, r4, pc}
3. Putting everything together: Tic-Tac-Toe game
We will now create an application that emulates the Tic-Tac-Toe game.
The users, Player-1 and Player-2, can use keyboard num-keys (the keys located above the alphabet keys) to place their marks in the corresponding location.
Follow the instructions below to implement a functional Tic-Tac-Toe game using your VGA and PS/2 drivers.
1- Fill the background of the game (the entire VGA panel) with a solid (single) color of your choice.
2- Draw a three-by-three grid in the middle of the VGA panel. The grid must be a square of size 207-by-207 pixels. You are free to choose any thickness and color for the lines composing the grid. Make sure that the game’s grid is visually appealing (size, color contrast with respect to the background, etc.,)..
3- You can either use the defualt “X” and “O” marks or alternatively, draw a “+” (corss) or an “unfilled square” as they are easier to draw. Player-1 always plays first, and its assigned mark is “X” or “+”. You are free to choose the color of the players’ marks. Make sure that the marks are visually appealing (size, color contrast with respect to the background, etc.,).
4- The game starts by pressing the 0
num-key.
5- You must write the players’ turn at the top-center of the VGA panel. Hint: Use the VGA_write_char_ASM subroutine.
6- Players can place their marks in the grid using the num-keys (1-9). If a place in the grid is already occupied, the game must wait until a correct number is inserted. In other words, the invalid entry must be ignored.
7- The result of the game (“Player-1 Wins”, “Player-2 Wins” or “Draw”) must be shown as soon as the result is discovered. Replace the players’ turn with the result.
8- Finally, pressing the 0
num-key will restart the game.
There are no restrictions on how you implement the game as long as you follow the instructions above. However, we encourage you to follow the guidelines below.
- Write a subroutine (VGA_fill_ASM) to fill the VGA panel with a solid color. The subroutine does not take any arguments. Hard code the background color.
- Write a subroutine (draw_grid_ASM) to draw the 3-by-3 grid described in step-2. The subroutine does not take any arguments. Hard code the grid’s lines color and thickness.
- Write a subroutine (draw_plus_ASM) to draw the “+” mark. The subroutine takes two arguments i.e., the center coordinates (x,y) of the mark. Hard code the mark color and size.
- Write a subroutine (draw_square_ASM) to draw the “unfilled square” mark. The subroutine takes two arguments i.e., the center coordinates (x,y) of the mark. Hard code the mark color and size.
- Write a subroutine (Player_turn_ASM) to write the player’s turn. The subroutine takes one argument i.e., the player’s turn (
'0'
for player-1 and'1'
for player-2). Hint: use VGA_write_char_ASM. - Write a subroutine (result_ASM) to write the result of the game. The subroutine takes one argument i.e., the result (
'0'
for player-1 Wins,'1'
for player-2 Wins and otherwise for Draw).
First, call the VGA_fill_ASM and the draw_grid_ASM subroutines in order. Wait for the 0
num-key to start the game. Call the Player_turn_ASM to write the player’s turn. You must always keep track of the players turn to pass the correct argument to the Player_turn_ASM. Upon receiving the mark placement of each player, place the mark by calling the draw_plus_ASM/draw_square_ASM subroutins and then check for a win pattern. You must always keep track of the players’ marks.Anytime a win pattern is detected, call the result_ASM subroutine with the correct argument (the winner). Otherwise, change the player’s turn and continue. If all places of the grid are occupied, and no win pattern is detected, call the result_ASM subroutine and pass a draw as the argument. Finally, wait for the 0
num-key to restart the game.
Hint: You may store the center coordinates of each grid tiles in memory and then retrieve them (when needed) by offsetting the base-address with the players input. Furthermore, download line.s
. This file includes the draw_rectangle
subroutine. You can use it to draw a line (horizontal and vertical) with variable length and thickness. (Pay attention to the width and height arguments of the draw_rectangle
subroutine).
Hint: You may use one-hot encoding when to keep track of the players’ marks.
draw_rectangle
draws a rectangle. It takes five arguments. The first four arguments are stored in registers r0 through r3. The fifth argument is stored on the stack at address[sp]
.draw_rectangle
’s signature is:/** * Draws a rectangle. * @param x The x coordinate of the top left corner of the rectangle. * @param y The y coordinate of the top left corner of the rectangle. * @param width The width of the rectangle. * @param height The height of the rectangle. * @param c The color with which to fill the rectangle. */ void draw_rectangle(int x, int y, int width, int height, int c);
Grading and Report
Your grade will be evaluated through the deliverables of your work during the demo (70%) (basically showing us the working programs), your answers to the questions raised by the TA’s during the demo (10%), and your lab report (20%).
Grade distribution of the demo:
- Part 1: VGA driver (30%).
- Part 2: PS/2 driver (20%).
- Part 3: Tic-Tac-toe game (20%).
Write up a short report (max 5 pages in total) that should include the following information.
- A brief description of each part completed (do not include the entire code in the body of the report).
- The approach taken (e.g., using subroutines, stack, etc.).
- The challenges faced, if any, and your solutions.
- Possible improvement to the programs.
Your final submission should be submitted on myCourses. The deadline for the submission and the report is Monday, 6 December 2021. A single compressed folder should be submitted in the .zip format, that contains the following files:
- Your lab report in pdf format: StudentID_FullName_Lab3_report.pdf
- The assembly program for Part 1: vga.s
- The assembly program for Part 2: ps2.s
- The assembly program for Part 3: game.s
- A screenshot of the tic-tac-toe resulting in draw: game.png. Make sure to take screenshots that include the simulator UI, so we can verify that your pictures were created by the simulator.